Electric chain hoist model CPM with suspension hook capacities 125 kg - 2.000 kg

Electric chain hoist model CPM with integral trolley capacities 125 kg - 2.000 kg

The model CPM is a robust, reliable and easy to service unit with a long service life. The whole range is fitted with many standard features that were usually only available as extras. The integral limit switches for the highest and lowest hook positions considerably extend the working life span of the slip clutch, motor and gearbox.

Features

• Classification 1 Am. As required the model CPM (with appropriate changes to lifting capacity resp. duty cycle) can also be graded up to the classification 3m. All known domestic and European regulations of the classification according to FEM, ISO or BS are complied with resp. exceeded.
• Counters for operating hours and number of starts for advanced operation monitoring.
• Main contactor as standard, for increased safety.
• 2 year warranty (excluding wear parts).
• Thermal overload protection as standard for the whole range.
• Duty cycle 50 % ED for single speed.
• Electromagnetic, spring pressure brake holds the load safely even in the event of power failure.
• Chain container standard.
• Motors according to VDE 0530 protected to IP55, against ingression of dust and water.
• Standard operating voltage: Euro-voltage 400 V, 50 Hz, 3-phase.
• Increased operating safety through 48 V control voltage (contactor control) and an encapsulated pendant control to IP 65.

Model	Capacity In kg / chain falls	Chain dimensions d x t in mm	Lifting speed		Hoist motor	Motor rating	Net weight*			Standard chain container for_m chain
			Main lift m/min	Fine lift m/min			Hook suspension kg	Push ** trolley kg	Electric *** trolley kg
CPM 1-8	125/1	5 x 15	8	-	0,4	50	21	32	41	8
CPMF 1-8	125/1	5 x 15	8	2	0,4/0,1	33/16	24	35	44	8
CPM 1-12	160/1	5 x 15	12	-	0,4	50	21	32	41	8
CPMF 1-12	160/1	5 x 15	12	3	0,4/0,1	33/16	24	35	44	8
CPM 2-8	250/1	5 x 15	8	-	0,4	50	21	32	41	8
CPMF 2-8	250/1	5 x 15	8	2	0,4/0,1	33/16	24	35	44	8